Skip to content
Antminer S19 Pro
Manufacturer: BitmainAlgorithm: SHA-256
BitmainSHA-256

Bitmain Antminer S19 Pro (110 TH/s) Review: Specs, Efficiency & Secondary Market Analysis

Comprehensive evaluation of the iconic Bitmain Antminer S19 Pro (110 TH/s at 3,250W, 29.5 J/TH). Analyzes secondary market value, low-cost power viability, and custom firmware tuning.

Hashrate110 TH/s
Power3,250 W
Efficiency29.5 J/TH

Daily Electricity Operating Costs (USD)

Continuous consumption of 3,250 Watts equals approximately 78.0 kWh per 24-hour day. These figures are editable planning assumptions that can be adjusted in our ASIC Profitability Calculator.

Hydro / Low Cost (Planning)$3.12@ $0.04 per kWh
Standard Hosting (Planning)$4.68@ $0.06 per kWh
Competitive Industrial (Planning)$6.24@ $0.08 per kWh

The Bitmain Antminer S19 Pro (110 TH/s) stands as one of the most prolific and widely deployed Bitcoin mining hardware platforms in cryptocurrency history. Delivering 110 TH/s at 3,250 Watts (29.5 J/TH), the S19 Pro defined the pre-halving era and continues to anchor global mining operations in regions blessed with sub-$0.05/kWh power or flare gas utilization.


Technical Specifications

Specification Technical Metric
Model Antminer S19 Pro
Manufacturer Bitmain
Algorithm SHA-256 (BTC / BCH)
Hashrate 110 TH/s ±3%
Power Consumption 3,250 W ±5%
Energy Efficiency 29.5 J/TH
Input Voltage 200–240V AC, 50/60 Hz
Cooling 4x 12038 Axial Cooling Fans
Acoustic Noise 75 dB @ 1 meter
Dimensions 370 mm x 195 mm x 290 mm
Net Weight 13.2 kg

Power Infrastructure & Cable Connections

The S19 Pro is powered by Bitmain’s APW12 power supply:

  • Dual C13/C14 Inputs: Unlike newer single-cord C19 models, the S19 Pro utilizes two C13 power receptacles. Each cable carries half the load (~6.8A @ 240V per cord).
  • Total Continuous Current: At 240V, the device draws 13.54 Amps total. At 220V, the draw is 14.77 Amps.
  • Electrical Safety Margin: A single 20A dedicated circuit breaker at 240V provides sufficient headroom under the 80% continuous load safety guideline (16A max).

Strategic Value in the Secondary Hardware Market

With the arrival of next-generation 15 J/TH rigs (such as the S21 series), the S19 Pro has transitioned into a high-utility secondary market asset:

  1. Low Upfront Capital Expenditure: Hardware acquisition costs per terahash have declined dramatically, significantly lowering the barrier to entry for operators with access to inexpensive energy.
  2. Custom Firmware Optimization: Autotuning firmwares enable dynamic frequency scaling, allowing operators to run “eco-mode” under-volting during high daytime electricity tariffs and overclocking during overnight off-peak surplus periods.
  3. Hydro & Immersion Conversions: Due to its widespread availability and spare-parts ecosystem, the S19 Pro platform is the most popular candidate for aftermarket liquid immersion tank and water-block conversions.

Operating Economics & Breakeven Thresholds (USD)

Operational electricity costs across power tiers:

  • At $0.03/kWh (Stranded Hydro / Flare Gas): Daily power expense is $2.34, yielding robust profitability.
  • At $0.05/kWh (Standard Industrial Tariff): Daily power expense is $3.90, operating near cash flow breakeven depending on prevailing hashprice.
  • At $0.08/kWh (Commercial Grid Tariff): Daily power expense is $6.24, requiring immediate curtailment unless spot Bitcoin prices spike.

Check real-time breakeven electricity pricing for your facility using the ASIC Profitability Calculator.

Frequently Asked Questions

Direct answers to common technical questions regarding mining hardware specifications, power efficiency, and profitability.

1Is the Antminer S19 Pro still profitable to run?
The S19 Pro operates at 29.5 J/TH. It remains viable primarily in facilities with ultra-low electricity tariffs (below $0.045 to $0.05/kWh) or through curtailment and stranded energy arrangements.
2Can custom firmware improve the efficiency of the S19 Pro?
Yes. Third-party firmwares (such as Braiins OS+ and LuxOS) feature per-chip autotuning and under-volting that can optimize S19 Pro efficiency down to approximately 24 to 26 J/TH at reduced hashrates.
3What power cables does the Antminer S19 Pro require?
The integrated APW12 power supply requires two standard C13 to C14 (or NEMA 6-15P/6-20P) power cables rated for at least 10A at 240V.
Share this article:

Related ASIC Miner Reviews