Skip to content
Antminer S21 Pro
Manufacturer: BitmainAlgorithm: SHA-256
BitmainSHA-256High Efficiency Flagship

Bitmain Antminer S21 Pro (234 TH/s) Review: Specs, Efficiency & Profitability

Comprehensive technical review of the Bitmain Antminer S21 Pro delivering 234 TH/s at 3,510W (15.0 J/TH). Includes 240V electrical sizing, thermal management, and USD profitability analysis.

Hashrate234 TH/s
Power3,510 W
Efficiency15.0 J/TH

Daily Electricity Operating Costs (USD)

Continuous consumption of 3,510 Watts equals approximately 84.2 kWh per 24-hour day. These figures are editable planning assumptions that can be adjusted in our ASIC Profitability Calculator.

Hydro / Low Cost (Planning)$3.37@ $0.04 per kWh
Standard Hosting (Planning)$5.05@ $0.06 per kWh
Competitive Industrial (Planning)$6.74@ $0.08 per kWh

The Bitmain Antminer S21 Pro (234 TH/s) represents one of the premier air-cooled Bitcoin mining flagships engineered for commercial and enterprise data center deployment. Combining cutting-edge 3nm custom ASIC dies with optimized thermal heatsinks, the S21 Pro achieves an energy efficiency rating of 15.0 J/TH, establishing an industry benchmark for post-halving operational viability.


Technical Specifications

Specification Technical Metric
Model Antminer S21 Pro
Manufacturer Bitmain
Algorithm SHA-256 (BTC / BCH)
Hashrate 234 TH/s ±3%
Power Consumption 3,510 W ±5%
Energy Efficiency 15.0 J/TH
Input Voltage 200–240V AC, 50/60 Hz
Cooling 4x 12038 Dual-Ball-Bearing Fans
Acoustic Noise 75 dB @ 1 meter
Dimensions 400 mm x 195 mm x 290 mm
Net Weight 15.4 kg
Network Connection RJ45 Ethernet 10/100M

Electrical Engineering & Sizing Requirements

Operating an enterprise-grade ASIC drawing 3,510 Watts requires careful electrical balance:

  1. Continuous Amperage Load: At a nominal single-phase voltage of 220V AC, the unit draws approximately 15.95 Amps. At 240V AC, continuous draw drops to 14.63 Amps.
  2. National Electrical Code (NEC) Compliance: Under NEC Article 210.20, continuous loads operating for 3 or more consecutive hours must not exceed 80% of circuit capacity. A 20-Amp breaker supports up to 16.0 Amps continuous load, making a dedicated 20A circuit the absolute minimum requirement. For commercial rack installations, 30A 240V circuits or 3-phase 415V/240V distribution through intelligent PDUs with C19 receptacles are strongly recommended.
  3. Power Factor Correction: The integrated APW12 series power supply maintains an Active Power Factor ($\text{PF}$) greater than 0.98, minimizing reactive power loss across site transformers.

Thermal Management & Airflow Optimization

The S21 Pro generates approximately 11,976 BTU/hr of thermal energy under standard ambient conditions:

  • Intake Envelope: Recommended ambient intake air temperature is between 15°C and 30°C (maximum operating threshold 40°C).
  • Volumetric Airflow: The four 12038 high-static-pressure fans displace approximately 400 to 450 CFM (Cubic Feet per Minute) of air at full duty cycle.
  • Plenum Design: Facility operators must implement Hot Aisle / Cold Aisle containment to prevent recirculation of 55°C+ exhaust air into the intake stream, which induces automatic thermal chip throttling.

Profitability & Cash Flow Modeling (USD)

Operational profitability is governed by global power costs and real-time Bitcoin network hashprice:

  • At $0.04/kWh Industrial Power: Daily electricity cost is $3.37. The unit delivers robust operational margins and rapid capital expenditure recovery.
  • At $0.06/kWh Commercial Power: Daily electricity cost is $5.05, remaining competitive across North American and Scandinavian hosting facilities.
  • At $0.08/kWh Baseline: Daily electricity cost is $6.74, maintaining positive cash flow even during periodic difficulty upswings.

Calculate live, real-time returns tailored to your specific power contract using our dedicated ASIC Profitability Calculator.

Frequently Asked Questions

Direct answers to common technical questions regarding mining hardware specifications, power efficiency, and profitability.

1What is the hash rate and power consumption of the Antminer S21 Pro?
The Bitmain Antminer S21 Pro delivers a nominal hash rate of 234 TH/s with a power consumption of 3,510 Watts, achieving an energy efficiency rating of 15.0 Joules per Terahash (J/TH).
2What electrical circuit is required to safely operate the Antminer S21 Pro?
Operating at 3,510W on a 220V–240V AC supply draws approximately 15.3 to 16.0 Amps. Under the NEC 80% continuous load rule, a dedicated 20A or 25A double-pole circuit with dual C19/C20 power cords is required.
3What is the breakeven electricity rate for the Antminer S21 Pro?
With its high 15.0 J/TH efficiency, the S21 Pro maintains positive cash flow at international industrial tariffs up to $0.09 to $0.11/kWh depending on live Bitcoin hashprice.
Share this article:

Related ASIC Miner Reviews